Loading…

How to troubleshoot electric water heater problems

Are you facing problems with your electric water heater for a while? Electric water heaters are of great use for domestic purposes. It is useful in a kitchen as well as in a bathroom. But there has always been some problems associated with electric water heater and people do not know the ways to get rid of those problems. Here in this article, you will be discussed common issues related to your water heater and solution to it.

 You might be surrounded by a variety of symptoms of your electric water heater. Problem with its temperature, leaks, odor, etc. are always prevalent. As your water heater ages, various symptoms arise.

 Turn off the power before you start your electric water heater

 As you are dealing with the electrical component, it is necessary to follow the safety rules. Make sure to turn off your heater before you deal with it? To turn the power off of your radiator, you can directly switch off the fuse or circuit breaker that is connected to the electric power heater unit.

 Problem with water temperatures of the heaters

 The most common problem related to the water heater is water temperature. The possible symptoms of it are hot water, inadequate hot water and water becomes too hot.

 If you experience no hot water coming out from the heater, then it might be the result of lack of power. Other possible reasons can be due to the electric thermostat as well as the electric heating element. These issues can only be solved by ruling out the power problems associated with the heater.

 Troubleshooting the problem

 Now you have to find a solution to this issue. In the first step, you have to reset the tripped circuit breaker that is connected with your heater. After you are done with the beginning, you have to ensure whether the power is provided to the thermostat, which is a water heating element.

 Once you are sure with the previous step, you need to test the element, and if you find it is faulty, then click this to repair this element. You might notice that the thermostat is receiving power, but if it fails to function, you have to replace the heating element.

 Problem with leaks

 There can be two possible reasons for the water leak in your water heater. It can be either due to fall temperature or pressure relief valve.  So you need to check the temperature and pressure valve. You can and place a bucket underneath the overhead pipe and then open the lid. After this, you must flush it so that all the debris is cleared off. However, if you still find that water is leaking, then you need to repair by calling a plumber.water heater repair

 Hope you have understood the reasons why your electric heater fails to heat the water properly. The two most common causes have been stated above, along with their solutions. Make sure to follow the safety advice before you perform the electrical operations with your electrical heating unit.

Leave a Reply